If you decide to use one be aware that many on the market are useless. They replace words randomly with synonyms or with a thesaurus and generate gibberish. If you choose to use article rewriting software make absolutely sure that you have complete control of the output and the input.

Maybe this will help explain what article spinners do and what some of their limitations are.

Let’s take a simple example. One original article with three paragraphs (1, A, and X). If your reword each of the paragraphs with two rewritten versions, you now have two additional articles with reworded paragraphs (2BY and 3CZ).

Article #1:  1 A X

Article #2:  2 B Y

Article #3:  3 C Z

You can now swap paragraphs, keeping the order of the pargraphs to make new articles. For instance, I can create an article with paragraphs 1, B, and Z and it would make sense.

But, I cannot have an article with three paragraphs 1, 2, and 3 because the article would consist of the first paragraph of each of the three versions saying the same thing only in different words.

I couldn’t create an article with paragraphs1, B, and C because the second and third paragraphs would be the same second paragraph from versions #2 and #3 using different words. Make sense?

New Articles:

1AX,1AY,1AZ,1BX, 1BY,1BZ, 1CX, 1CY,1CZ
2AX, 2AY, 2AZ, 2BX, 2BY, 2BZ, 2CX, 2CY, 2CZ
3AX, 3AY, 3AZ, 3BX, 3BY, 3BZ, 3CX, 3CY, 3CZ

A total of 27 new articles including the originals! The number of possible combinations is the number of articles you create raised to the power of the number of paragraphs in the article. In this case, 3X3X3 = 27. If you had 5 paragraphs and you changed all 5, then the number of possible articles would be 3X3X3X3X3 = 243 articles. NOTE: This formula only works if you change all of the paragraphs in your article.

The problem, of course, is determining the uniqueness of the article content or, in other words, how much duplicate content exists in these articles.

Click here to learn about SpinLeverage Technology.

We know that we have three 100% unique articles because we created them. What about the other 24?

We know that none of the 24 will be better than approximately 66% unique or 34% duplicate content of the original article (1AX). Why? Because there were only 3 paragraphs changed. None of the articles can have more than two different paragraphs. Two of three paragraphs equals 66%.

If you had only 2 paragraphs to change in a 2 paragraph article, none of the articles would be better than approximately 50% unique. If you had 10 paragraphs and changed all 10, the percentage would reach about 90% uniqueness. The more paragraphs the greater the uniqueness. I say approximately because the software algorithms used to compute uniqueness varies.

Another word of caution, the uniqueness of the articles is measured against the original article,1AX, NOT among themselves. So, which ones are unique and which are not? You need an article content software tool to tell you. Content comparison software is available that allows you to choose how many consecutive words, sentences or paragraphs you want to set as a minimum.

In the previous example of the 24 spun articles you will find that around half of them are 70% unique or better, if you set the measurement at 3 consecutive sentences. I choose 3 sentences because most of my paragraphs are that length.

70% is pretty good. Depending on your intent you may want to check the spun articles against one another. But again, depending on your intent that may not matter to you. When you consider that many people submit the same article to multiple directories, what’s a little duplication?

There is only one Article Spinner that I know of that delivers what it promises and it’s cheap! Click on that link and find out why!

Bookmark It

I would leave that site quicker than the flicker of wind blown flame. Why? Because the author of the article or site is lazy and not really interested in providing me with useful and unique information.

Here are a few tips that you should consider when writing an article for publication to an article directory.

• After writing the article consider rewriting several different versions of the article.
• While it is fresh in your memory, it is easy to reword.
• Start with the first paragraph. Use synonyms and rearrange the rewritten sentences.
• It is best to go through the entire article. Rewording each paragraph.
• Create at least two versions for each paragraph.
• Limiting your rewrite to words, phrases, or sentences undermines the uniqueness you are trying to create.
• Rewriting your articles and submitting unique articles to different directories increases your search engine exposure.
• Do not use rewriting software that arbitrarily or randomly uses synonyms to automatically generate articles. It is a waste of your money and time.
• If you do decide to use article rewriting software, make sure that you have complete control of the input and the output.
• With two or more versions for each paragraph and a good rewriting software you can easily generate 10 to 20 unique and quality articles.
• Rewriting articles not only improves search engine optimization (SEO), it reduces the bounce rate to your site. Thus, more sales!

Article rewriting can be time consuming without some automation. Nevertheless, it is well worth the effort. How would you like to go from one site to another and find the exact same article? I think not.

I personally know of only one piece of software that allows you complete and total control of the content of your rewritten articles.

Please read this review and decide for yourself. I think you would agree that rewriting your articles for multiple submissions makes sense.

Bookmark It

To spin or not to spin, that is the question. I am relatively new to internet marketing. I chose article marketing as my method of marketing because I like to write. That sounds logical enough.

In the course of writing my articles, I soon discovered two things. One, I am too particular about my writing. I edit and re-edit and re-edit. I know that there are article marketers that whip out ten, twenty, or more articles everyday.  To this day, I am not sure how they do it. I can see slaving over maybe ten articles per day.  But, more than that everyday?

I mean quality content articles, articles that provide information, that say something. Now I am not knocking those that can pump out twenty or more articles of good content. But, just how many of those authors are out there.

I mean really writing solid articles with usable information. Take this article, so far I haven’t said much. I have spouted about my disbelief. Have I truly relayed to you any useful information? No, I didn’t think so. I have almost written 200 words and have yet to give you, the reader, useful information. Maybe, this how and what those authors write to get such volume.

The second thing I discovered is that although content is king, volume is his kingdom. Content without volume is like a king without subjects. Without a kingdom, there are no revenues and the king goes broke.  The kingdom (volume) provides subjects (traffic, readers) which in turn provide revenue.

I concluded that there are at least four ways to increase your writing;

1. Write more.
2. Hire writers to write for you.
3. Buy Private Label Right (PLR) articles and rewrite them or attempt to publish them as is.
4. Spin your original articles.

I have already dismissed the first one for reasons I stated earlier. I am slow. The second way is too costly for me now and I fear that I would be overly critical and end up rewriting them any way. The third method I reject for the same reasons as the second. I would end up rewriting the article.

Besides, what I have seen of PLRs, the best they can do is give you ideas for articles. We are left with spinning your article. That authors spin their articles always had me wondering. Why not just write another article? Surfing the forums you hear horror stories about automatically spun articles that put out un-intelligible garbage.

Why take the time and money to input an article into a spinner only to have it come out reading like alphabet soup? And, besides all that, you are cautioned to make sure that the spun article does not exceed 30% duplicate content. Doesn’t that sound like a complete re-write? I have never been an advocate of spinning articles. It seemed to me that I would just be rehashing the same stuff over and over again.

Many article directories will accept previously published articles. Some do not. Submitting previously published articles is like a writing a syndicated column for newspapers. The same article appears in many different newspapers. Why not do the same with an article marketers article?

There is a difference. One day I was re-reading one of my articles that I came across while surfing the internet. I clicked on the link at the bottom just to make sure the link was working properly. The link worked all right, but it went to one of my blogs. Can you guess what the first post on that page was?

Yep, I had just read the same article. I found that to be annoying and, well, poor taste. I think a reader would quickly bounce off the page and go elsewhere. So, I decided to re-write the article, but I remembered that the same article was appearing in many other directories. I would have to write many different versions of that same article to give the reader some uniqueness and still convey the original message.

It was then that I became a convert to article spinning. A word of caution, most article spinners are not worth the price, free or otherwise. Be very careful, only select a spinner that allows you full control of the output and then check each spun article for uniqueness.

There is only one Article Spinner that I know of that delivers what it promises and it’s cheap! Click on that link and find out why!

Bookmark It