No magic bullet exists that will create readable coherent articles from any one article by using automated spinners. Have you experimented with automated spinners? Then you know that article spinning is for the most part a useless endeavor. Or, the system is so complicated and hard to implement that you give up using it.

What if you could create unique quality content, simply and easily? Would that interest you? It did me. Well you can.

New technology can now let you create 10-20 or more unique readable articles quickly. With this rewriting tool, you will increase your output tenfold with less than half the effort.

Many think that rewriting an article is some kind of cheating. It is not. If you are an article marketer, you know that the number of articles you publish is critical to your success. Although the words spinning and rewriting are used interchangeably, some say that rewriting is the same as spinning an article that is not correct.

Spinning an article is the random substitution of words, usually synonyms, in an article. The result is sometimes readable but often it is not. It can also be the mixing of different paragraphs or sentences from different articles to create a “unique” article.

Many writers fail to understand that you must create at least two additional versions of the entire article before you can successfully create multiple spun articles. They think that changing a word here or there or an occasional sentence will do the trick. Not so! You will not get the recommended 70% uniqueness for the spun articles.

You know, as I do, that there are free article spinners on the internet. There is old adage, “You get what you pay for.” I believe that is true.

Develop a simple system. With the original article as a template, start rewriting paragraph by paragraph. You will be surprised how quickly you can think of alternative wording for your original article.

Create two additional versions for each paragraph. This will insure a good number of quality unique spun articles. The number of spun articles generated is dependent on the number of paragraphs in the article and the number of versions you create.

For instance, if you have only two versions of an article with five paragraphs, you will have 32 spun articles. If you have three versions of an article with five paragraphs, you will have 243 spun articles. The number of spun articles increases exponentially. Not all the articles will be 70% or better in uniqueness, but many will.

Wouldn’t that kind of productivity increase your traffic? Of course, it would. What could you do with those unique articles?  You could post them on blogs, forums, and directories. You could create PDF files, newsletters, and e-books.

Think of a reader stumbling on one of your articles on the web, clicking through to your blog or site and finding the very same article – not good. Having a unique article or post will decrease your bounce rate.

If you are a serious article marketer, you know the value of writing many articles to get traffic. With a rewriting tool like Rapid Rewriter, you can easily create many unique readable articles in minutes as opposed to hours.

Spinning an article is easy with the right tool.

Bookmark It

If you decide to use one be aware that many on the market are useless. They replace words randomly with synonyms or with a thesaurus and generate gibberish. If you choose to use article rewriting software make absolutely sure that you have complete control of the output and the input.

Maybe this will help explain what article spinners do and what some of their limitations are.

Let’s take a simple example. One original article with three paragraphs (1, A, and X). If your reword each of the paragraphs with two rewritten versions, you now have two additional articles with reworded paragraphs (2BY and 3CZ).

Article #1:  1 A X

Article #2:  2 B Y

Article #3:  3 C Z

You can now swap paragraphs, keeping the order of the pargraphs to make new articles. For instance, I can create an article with paragraphs 1, B, and Z and it would make sense.

But, I cannot have an article with three paragraphs 1, 2, and 3 because the article would consist of the first paragraph of each of the three versions saying the same thing only in different words.

I couldn’t create an article with paragraphs1, B, and C because the second and third paragraphs would be the same second paragraph from versions #2 and #3 using different words. Make sense?

New Articles:

1AX,1AY,1AZ,1BX, 1BY,1BZ, 1CX, 1CY,1CZ
2AX, 2AY, 2AZ, 2BX, 2BY, 2BZ, 2CX, 2CY, 2CZ
3AX, 3AY, 3AZ, 3BX, 3BY, 3BZ, 3CX, 3CY, 3CZ

A total of 27 new articles including the originals! The number of possible combinations is the number of articles you create raised to the power of the number of paragraphs in the article. In this case, 3X3X3 = 27. If you had 5 paragraphs and you changed all 5, then the number of possible articles would be 3X3X3X3X3 = 243 articles. NOTE: This formula only works if you change all of the paragraphs in your article.

The problem, of course, is determining the uniqueness of the article content or, in other words, how much duplicate content exists in these articles.

Click here to learn about SpinLeverage Technology.

We know that we have three 100% unique articles because we created them. What about the other 24?

We know that none of the 24 will be better than approximately 66% unique or 34% duplicate content of the original article (1AX). Why? Because there were only 3 paragraphs changed. None of the articles can have more than two different paragraphs. Two of three paragraphs equals 66%.

If you had only 2 paragraphs to change in a 2 paragraph article, none of the articles would be better than approximately 50% unique. If you had 10 paragraphs and changed all 10, the percentage would reach about 90% uniqueness. The more paragraphs the greater the uniqueness. I say approximately because the software algorithms used to compute uniqueness varies.

Another word of caution, the uniqueness of the articles is measured against the original article,1AX, NOT among themselves. So, which ones are unique and which are not? You need an article content software tool to tell you. Content comparison software is available that allows you to choose how many consecutive words, sentences or paragraphs you want to set as a minimum.

In the previous example of the 24 spun articles you will find that around half of them are 70% unique or better, if you set the measurement at 3 consecutive sentences. I choose 3 sentences because most of my paragraphs are that length.

70% is pretty good. Depending on your intent you may want to check the spun articles against one another. But again, depending on your intent that may not matter to you. When you consider that many people submit the same article to multiple directories, what’s a little duplication?

There is only one Article Spinner that I know of that delivers what it promises and it’s cheap! Click on that link and find out why!

Bookmark It