Definitions

Traditionally, spinning has been and is associated with articles that are gibberish. I have read material on the web that can only have been written by a robot, or perhaps by a third grade foreigner attempting to learn to read and write English. The results are much less than acceptable. In fact, they are abominable.

If that is spinning articles, then it should surely be banned from the web. It is quite obvious that no human ever looked at the article before it was published on the web.

I can only conclude that the article was composed by one of those automated non-human spinning services. Although, I have never used spinning services and I can only speak from my observation. And, my observation is not quantified.

It appears as if the material is generated by substituting synonyms for specific words or by substituting phrases. The results seem to be generated without human intervention.

Another definition could be that of rewriting an article with some human intervention. The author selects specific words or phrases and allows the software to generate articles based on those substitutions.

Again, human intervention is limited and the results often require significant editing to make the article ready for web publication. Of course, some article marketers may be only interested in SEO and publish the material “as is” resulting in sometimes nonsensical verbiage or at best second or third grade reading material.

If the definition of spinning an article falls within either of these two definitions or methods, then I must agree with the naysayers and ask that all such work be banned from the internet. This is where the debate fails to distinguish between the traditional limited definition and a definition that is more universal.

Repackaged Articles

Few can deny that they have “repackaged” an article to save time or to quell a writer’s block. Rewriting or repackaging an article is acceptable.

A publisher-editor of a well known and popular article directory once said, “Repackaged, rewritten articles on the same subject are hardly ever 100% unique.” He also said, “… the use of existing articles reworded or not, is not an issue.”

Given that even repackaged rewritten articles are hardly ever 100% unique; would it be far fetched to describe those articles as spun articles? I think not.

So the hotly debated spinning issue comes down to what kind of spun articles are acceptable. It is not whether or not articles should be spun; it is rather how they should be spun and how they are used. That spun articles are acceptable is a fact. The quality of spun articles and their use are the issues.

Now that we have established that rewritten spun articles are not an issue what remains is a debate over the quality and use of those articles.

Two Schools

Obviously, there are two schools of thought. One school believes that spinning is wrong, bad, spamming, and black hat. The other claims that spinning is useful, not spamming, and good for SEO.

The first school holds their view simply because of their limited definition of spinning. I doubt that not at least one of them have written on the same topic more than once. That they have, regardless of whether they used an existing article as a template or not, they put a new or different twist on the subject and in that sense the article was spun.

Fully Automated Services

One method is to use a spinning service. You submit an article to this service and they generate spun articles which then you can use or not. As mentioned at the beginning of this article, most often, the results are abominable.

Automated Human Assisted

Another method uses software that takes an article and replaces words that you identify with synonyms. This gives much better results than the first method. However, the results are still very often less than acceptable and require significant rewrites and editing to make them worthy of publication.

Human Generated Auto-Assisted

There is a third method that does generate high quality, informative, and unique content. In its strictest sense, this method is one of rewriting an article. The author rewrites the original article on a sentence by sentence or paragraph by paragraph basis. An article with a sufficient number of paragraphs can be rewritten paragraph by paragraph. Human automated assisted tools will yield countless high quality unique articles.

With the magic of randomizing software and the truth of mathematics, thousands of unique articles in the eighty plus percentile of uniqueness can be created. Even the closest of scrutiny would find it difficult to determine the originals.

What is the problem? How are properly rewritten articles spun or not spun, not be valid informative quality articles? Negative responses elude me.

Learn to rewrite your articles with quality content with human generated auto-assisted software.

Bookmark It

To spin or not to spin, that is the question. I am relatively new to internet marketing. I chose article marketing as my method of marketing because I like to write. That sounds logical enough.

In the course of writing my articles, I soon discovered two things. One, I am too particular about my writing. I edit and re-edit and re-edit. I know that there are article marketers that whip out ten, twenty, or more articles everyday.  To this day, I am not sure how they do it. I can see slaving over maybe ten articles per day.  But, more than that everyday?

I mean quality content articles, articles that provide information, that say something. Now I am not knocking those that can pump out twenty or more articles of good content. But, just how many of those authors are out there.

I mean really writing solid articles with usable information. Take this article, so far I haven’t said much. I have spouted about my disbelief. Have I truly relayed to you any useful information? No, I didn’t think so. I have almost written 200 words and have yet to give you, the reader, useful information. Maybe, this how and what those authors write to get such volume.

The second thing I discovered is that although content is king, volume is his kingdom. Content without volume is like a king without subjects. Without a kingdom, there are no revenues and the king goes broke.  The kingdom (volume) provides subjects (traffic, readers) which in turn provide revenue.

I concluded that there are at least four ways to increase your writing;

1. Write more.
2. Hire writers to write for you.
3. Buy Private Label Right (PLR) articles and rewrite them or attempt to publish them as is.
4. Spin your original articles.

I have already dismissed the first one for reasons I stated earlier. I am slow. The second way is too costly for me now and I fear that I would be overly critical and end up rewriting them any way. The third method I reject for the same reasons as the second. I would end up rewriting the article.

Besides, what I have seen of PLRs, the best they can do is give you ideas for articles. We are left with spinning your article. That authors spin their articles always had me wondering. Why not just write another article? Surfing the forums you hear horror stories about automatically spun articles that put out un-intelligible garbage.

Why take the time and money to input an article into a spinner only to have it come out reading like alphabet soup? And, besides all that, you are cautioned to make sure that the spun article does not exceed 30% duplicate content. Doesn’t that sound like a complete re-write? I have never been an advocate of spinning articles. It seemed to me that I would just be rehashing the same stuff over and over again.

Many article directories will accept previously published articles. Some do not. Submitting previously published articles is like a writing a syndicated column for newspapers. The same article appears in many different newspapers. Why not do the same with an article marketers article?

There is a difference. One day I was re-reading one of my articles that I came across while surfing the internet. I clicked on the link at the bottom just to make sure the link was working properly. The link worked all right, but it went to one of my blogs. Can you guess what the first post on that page was?

Yep, I had just read the same article. I found that to be annoying and, well, poor taste. I think a reader would quickly bounce off the page and go elsewhere. So, I decided to re-write the article, but I remembered that the same article was appearing in many other directories. I would have to write many different versions of that same article to give the reader some uniqueness and still convey the original message.

It was then that I became a convert to article spinning. A word of caution, most article spinners are not worth the price, free or otherwise. Be very careful, only select a spinner that allows you full control of the output and then check each spun article for uniqueness.

There is only one Article Spinner that I know of that delivers what it promises and it’s cheap! Click on that link and find out why!

Bookmark It